RUV in Production: Rings and Fingers.

Ceramic parts can have different size and shape. However all bear common issue of mechanical stability in terms of cracks, which compromise parts strength and lead to part failure in a production system. RUV technology was adapted to this problem with two examples detailed below.


  • Ceramic Rings
  • Cracks in ceramic rings can be visualized using dye penetration technique. This approach is labor intense and takes time. RUV method provides 100% inspection accuracy of closed cracks even when ceramic is coated with metal layer (for future part brazing). Picture below shows RUV scans of (a) good non-cracked ring and (b) identical size ring with invisible crack confirmed by Scanning Acoustic Microscopy. Each sample was measured three times at different ring orientation with respect to probe-transducer axes. This algorithm provides highly accurate crack inspection in rings. RUV tool is fully automated by Ultrasonic Technologies, and operates 24/7 in ring production with throughput of 240 parts per hour (ref: Video Gallery).

    Good Rings Cracked Rings

  • Ceramic Fingers
  • These parts have broad application in advanced micromechanical systems used in medical industry (see part pictures below). Cracks in ceramic fingers have detrimental effect on product reliability and safety and therefore, must be eliminated before their installation. Ultrasonic Technologies jointly with finger manufacturer performed comprehensive development and upgrade of RUV technology to achieve 100% crack reduction occurred below 0.2% level. RUV scans of 20 good fingers are compared to cracked finger as presented in Figures.



    No Crack finger Crack left side Crack at the bottom
    (a) No Crack (b) Crack (left side) (c) Crack (bottom)

    High resolution Scanning Acoustic Microscopy of ceramic fingers (a) good sample (b) and (c) cracked samples

    Good and Cracked rings Good and Cracked rings

    RUV scans on 20 Good fingers and cracked fingers (red line)



    The system utilizes a concept of fast, non-destructive measurements on increasing the yield of the production lines. RUV system is a computer controlled unit with Windows-based software providing the system operation, data acquisition and data processing.

    Contact us for additional system specification and information about pricing and delivery terms.


    Contact Us:

    Ultrasonic Technologies
    2664 Cypress Ridge Blvd, Suite 103
    Wesley Chapel, FL 33544 USA
    Phone: (813) 973-1702
    UST-UK LTD
    Unit 6 Queens Yard
    Whita Post Lane, London
    UNITED KINGDOM E9 5EN, 72190
    Contact Form